Certification: | CCC, ISO9001, SGS |
---|---|
Shell Material: | Steel Plate |
Voltage Level: | Low Voltage |
Installation: | Removable |
Structure: | Withdrawable |
Use for: | Power Distribution |
Customization: |
---|
Suppliers with verified business licenses
GGD low voltage switchboard is widely used in the distribution system of AC50Hz, rated voltage 380V, rated current up to 5000A, to transfer, distribute and control electricity and electric equipment such as lighting, motor and etc.
The product has such features of high breaking capacity, good dynamic and thermal steady ability, electric schemes are various, free combination, practical, new structure, high protection grade and etc. this switchgear can be use to replace the old equipment with similar use.
Comply with GB7251.1-2005 Low voltage switchgear and controlgear, IEC60439-1 Low voltage switchgear and controlgear standard.
Model | Rated Voltage (V) | Rated Current (A) | Rated Short-circuit Breaking Current (kA) | Rated Short-time Withstand Current (kA) | Rated Peak Withstand Current (kA) |
GGD1 | 380 | A 1000 | 15 | 15 | 30 |
B 600(630) | |||||
C 400 | |||||
GGD2 | 380 | A 1500(1600) | 30 | 30 | 63 |
B 1000 | |||||
C 600 | |||||
GGD3 | 380 | A 3200 | 50 | 50 | 105 |
B 2500 | |||||
C 2000 |
The switchboard body of GGD is common type, frame made of 8MF cold bent steel sheet and partially welded and then assembled, the accessories for this switchgear supplied by the
experienced producer, to ensure the exactness and quality.
General parts designed as module, with 20E mounting hole, general use, the factory can make many in stocking to improve the efficiency and shorten the production period.
GGD switchgear has completely considered the heat radiation, on top and bottom of switchboard different qty of radiation channel holes provided, when electric component in service and heating, the hot air will be exhausted from top channel holes and cold air inlet from downside channel holes form a natural air circulation passage for radiation.
GGD switchgear is designed according to modern industry technology, determine the sizes of each part and switchgear outline at golden ratio, the whole switchgear look beautiful.
Rotation shaft and hinge of switchgear door jointed with frame, easy to be installed and dismantled, the folded edge of door embedded with one rubber piece to prevent the direct knock between door and switchgear body, also the protection grade to be increased.
The metering door installed with electric components, connected by multi-stranded soft wire. The mounting parts are jointed with frame by knurled screws. Consequently the whole switchboard can form a complete earthing circuit.
The surface of switchgear is coated with spraying plastic, high adhesive, good touch feeling, Matte color without blinding effect, make the operating site look comfortable.
The top cover can be dismantled if required, for the installation or adjustment of main busbar four lifting lugs provided on the top corners for carrying and lifting.
Protection grade of switchgear body lP30, user can also choose between lP20-IP40 according to working conditions.
Q: Could I have prices of your products?
Suppliers with verified business licenses