Application: | High-voltage |
---|---|
Material: | Porcelain |
Structure: | Pin Insulator |
Usage: | High Voltage Power Transmission, Insulation, Electrical Installation |
Connection Method: | Spherical Type |
Certification: | CCC, ISO9001 |
Customization: |
---|
Suppliers with verified business licenses
As the name suggests, pin-type insulators are mounted on pins on the cross arms of the pole. There is a groove on the upper end of the insulator. The conductor is passed through this groove and tied to the insulator with annealed wire of the same material as the conductor. Pin insulators are used for power transmission and distribution with voltages up to 33 kV. For operating voltages exceeding 33 kV, pin insulators are required which are too bulky and therefore uneconomical.
ANSI Class | 56-1 | 56-2 | 56-3 | 56-4 | 56-5 | |
Neck Type | J | K | K | / | / | |
Leakage Distance-mm | 330 | 432 | 533 | 685 | 864 | |
Dry Arcing Distance-mm | 178 | 210 | 241 | 285.8 | 355.6 | |
Minimum Pin Length-mm | 152 | 178 | 203 | 254 | 305 | |
Main Dimensions-mm | D-Diameter | 191 | 229 | 267 | 305 | 343 |
H-Height | 146 | 165 | 191 | 241 | 318 | |
N-Neck Diameter | 89 | 102 | 102 | 114 | 140 | |
E-Pin Diameter | 35 | 35 | 35 | 35 | 35 | |
S-Saddle Groove Radius | 19 | 19 | 19 | 19 | 19 | |
Wire Grooves Radius | 14 | 14 | 14 | 14 | 14 | |
Cantilever Strength-kN | 11 | 13 | 13 | 13 | 13 | |
Low-Frequency Flashover Voltage | Dry-kV | 95 | 110 | 125 | 140 | 175 |
Wet-kV | 60 | 70 | 80 | 95 | 125 | |
Critical Impulse Flashover Voltage | Positive-kV | 150 | 175 | 200 | 225 | 270 |
Neagtive-kV | 190 | 225 | 265 | 310 | 340 | |
Radio Influence Voltage | Test Voltage to Ground-kV | 15 | 22 | 30 | 30 | 44 |
Max. RIV at 1000 KHz-uV | 100 | 100 | 200 | 200 | 200 | |
Power Frequency Puncture Voltage, kV | 130 | 145 | 165 | 185 | 225 |
Q: Could I have prices of your products?
Suppliers with verified business licenses